CalibrationOS manages calibration for pressure gauges, transmitters, transducers, and deadweight testers. Track multi-point up-scale and down-scale results, calculate hysteresis, and generate certificates that satisfy ISO/IEC 17025 and industry-specific pressure calibration requirements.
Pressure instruments operate across vast ranges — from vacuum to hundreds of thousands of PSI — and serve in safety-critical applications from process plants to aircraft hydraulics. Calibration involves multi-point ascending and descending runs, hysteresis evaluation, and unit conversions. Generic calibration software often lacks the structure to capture pressure-specific test data correctly.
Define calibration procedures with ascending and descending test points across the instrument's range. CalibrationOS captures readings at each point in both directions and calculates hysteresis automatically.
Work in PSI, bar, kPa, mbar, inHg, mmHg, or any standard pressure unit. CalibrationOS converts between units on the fly so you can match customer requirements without manual calculation errors.
Track reference deadweight testers and their mass sets as calibrated reference standards. Link each pressure gauge calibration to the specific deadweight tester and masses used, maintaining complete traceability.
Capture as-found readings before any adjustment and as-left readings after. CalibrationOS stores both datasets on the certificate, providing complete evidence of instrument condition and any corrections made.
Record leak test and stability check results as part of the calibration procedure. Flag instruments that fail pre-calibration checks and route them to repair workflows before proceeding.
Yes. When you define ascending and descending test points, CalibrationOS automatically calculates hysteresis at each common point and evaluates it against your acceptance criteria. Hysteresis values appear on the calibration certificate.
Yes. CalibrationOS supports all common pressure units including PSI, bar, kPa, mbar, Pa, inHg, mmHg, and cmH2O. You can set the working unit per procedure or per instrument and convert between them without manual calculations.
Deadweight testers and their mass sets are managed as reference standards within CalibrationOS. Each pressure gauge calibration links to the specific tester used, which links to its own calibration certificate, creating a complete traceability chain.
Yes. CalibrationOS supports dual-dataset calibrations where as-found readings are captured first, adjustments are made if needed, and as-left readings are recorded. Both datasets appear on the certificate with clear labeling.
25 assets, full tracking, immutable audit log. No credit card required.
Get Started Free